JA-120N Bus module for control of an electric lock

JA-120N Bus module for control of an electric lock

The JA-120N module is designed for the power supply and control of electric locks and release systems from the system bus. It is fitted with batteries that ensure the initial current impulse required to open el. locks.

More details

Not in stock - estimated delivery is in 2 to 3 weeks

JA-120N Bus module for control of an electric lock

The JA-120N module is designed for the power supply and control of electric locks and release systems from the system bus. It is fitted with batteries that ensure the initial current impulse required to open el. locks.

The JA-120N can be conveniently installed in all places where an external power supply for electric lock control would be difficult to install. To module responds to a PG output of the control panel or it can be activated with a button connected to the IN input (it can be optionally locked by section control). The module is addressable and it occupies one position in the system

 

Specifications

Power supply

via the control panel bus 12 V (9 - 15 V)

Back-up battery

3x 1.2V NiMh Eneloop AA HR-3UTGA 1900mAh

Module consumption in idle state

10mA / 60 mA (without / with battery recharging)

DOOR output load

impulse (1s) 600 mA, permanent 300 mA

Recommended locks:

manufacturer: Bera s.r.o – type: Befo 11211 or Befo 31211 (requiring external power supply)

Dimensions:

90 x 90 x 35 mm

Environmental class according to EN 50131-1

II. General indoor

Operation temperature range

0°C to +40°C (for NiMh Eneloop) -10°C to + 40°C (for NiCd)

Security grade

2 in acc. with EN 50131-1, EN 50131-3,

It also meets the requirements of

EN 50130-4, EN 55022, EN 60950-1

Maybe you like