AC-160-C Mounting-box-fitted wireless multifunctional power relay

AC-160-C Mounting-box-fitted wireless multifunctional power relay

The wireless multifunctional power relay is a component of the JABLOTRON 100 system. Enrolled to the control panel, the relay copies selected PG outputs.

More details

Not in stock - estimated delivery is in 2 to 3 weeks

AC-160-C Mounting-box-fitted wireless multifunctional power relay

The wireless multifunctional power relay is a component of the JABLOTRON 100 system. Enrolled to the control panel, the relay copies selected PG outputs.

The relay can also be installed as an autonomous device responding to the activation of unidirectional wireless detectors of the JA-15x series. In this case, the relay triggers according to the mode selected for the particular detector (5 selectable modes: extended copy, impulse, change status, switch off and block). It provides a switching relay with galvanic safety separation for switching 230V/16A power loads. In the system it occupies one position.

Specifications

Rated supply voltage

100-230 V, 50-60 Hz

Internal power consumption at 230V AC (min / max)

0.2 W / 0.7 W

Operating frequency

868.1 MHz, Jablotron protocol

Antenna

internal

Contact load capacity – protection class II

Max. switched voltage 250 V AC Resistance load (cosφ=1) max. 16 A Inductive, capacitive load (cosφ=0.4) max. 8 A Halogen lighting max. 1000 W  Minimum switched DC power 0.5 W

Diameter of connected conductors

max. 2 x 1.5 mm2 ; max. 1 x 2.5 mm2

Ingress protection class

IP20

Dimensions

49 x 49 x 26 mm

Operating temperature range

-10 °C to + 40 °C, RH 75% non-condensing

In conformity with

ETSI EN 300 220-1, EN 50130-4, EN 55022, EN 60950-1

Operating conditions

ERC REC 70-03

Maybe you like